MES924DB Replacement for Dover LED emergency light
This is one of our many emergency lights
Emergency Light Board -
OEM part #s 110938,
110941, 118412, 9818420
Back by popular demand! The MES924DB LED emergency light - replacement for Dover comes with a 12V 1.2 mAh battery, hardware and mounting instructions.
Now with a Lifetime Warranty!
TECHNICAL SPECIFICATIONS
Model MES924 (rev 10)
Light Source 6 amber light emitting diodes.
Battery 12v battery optionally supplied.
Input Voltage 120vac, 50 to 60 Hz
Emergency Duration Using 1.3Ah battery with no lens, illumination only (no alarm bell):
With fully charged battery 12 lux
After 4 hours 12 lux
After 6 hours 10 lux
Measurements were taken with emergency light mounted 6 ft. off floor in car operator panel. Tenma model 72-6693 light meter was held 4 ft off the floor, 1 ft in front of pushbutton panel.
With alarm button pressed constantly, duration times are decreased by about 40%.
CSA CSA approved when used with Werker WKA12-2.3F battery.
Charger Solid state automatic constant current charger. Charges at 100mA.
Monitoring Red LED indicating supply is healthy and charging is on
Diffuser not supplied
Alarm bell not supplied. Unit will accept either a 6vdc or a 12vdc alarm bell. Bell turns on and off at 1sec. intervals when alarm button is pressed.
Alarm button not supplied.
Mounting mounts to four studs. Mounting holes are 0.2” diameter. Mounting hole footprint – 3.50” x 2.95”.
Weight 0.5 lbs.
Dimensions 5.50” x 3.25” x 2.25”
Warranty Lifetime warranty. Warranty does not cover vandalism, acts of God, or improper installation or usage.
Specifications are subject to change without notice.
Call for investment and volume discount
Toll Free (800) 782-4449
Fax (828) 274-5928
![]()